Sensaphone SAT4D User Manual
Page 16
16
SAT4D User’s Manual
1 C
ZONES
2 C
3 C
4 C
~
~ ~
~
Multiple normally-closed
sensors wired in series
(example using Input 2)
Alert condition
occurs when a
switch is opened
Multiple Normally Closed Sensors
CONFIGURING THE INpUT NORMALITY
Each Zone Input must be configured as either Normally Open or
Normally Closed. The default setting is Normally Open. There
is a DIP switch for each zone input to select the proper normal-
ity. When the switch is in the OFF position the zone is configured
as Normally open, when in the ON position it is configured as
Normally Closed. Be sure to set each switch to the proper position.
Chan 1 Chan 2 Chan 3 Chan 4
NO/NC 1A 1B
NO/NC 2A 2B
NO/NC 3A 3B
NO/NC 4A 4B
ON
OFF
Zone 1
N.O.
3 Sec
Zone 2
N.C.
5 Min
Zone 3
N.O.
1 Min
Zone 4
N.O.
10 Min
Sample DIP Switch Settings