Sensaphone SCADA 3000 Users manual - Manual (Page 290)

G-2
SCADA 3000 User’s Manual
OPTIONS
From the File menu, select Options. The following form with 4 tabs should appear.
Figure 2: Options, Local tab
Local Tab
This screen provides several options which allow the upgrade program to automatically execute
certain functions. A description of each is listed below.
Manual Operation: Requires the user to manually verify which files need to be upgraded, click
the Retrieve button to download the files, and separately click the Install button to complete
the upgrade.
Automatically Download after Verification. Clicking on the Start button will verify and download
automatically, but will not install.
Automatically Download and Install. In this mode, clicking on the one Start button verifies,
downloads and installs.
Auto-Close after Install will close the upgrade program once the update has been installed.
Auto-Launch will open your SCADA software immediately after closing.
Note: If you check the Automatically Download and Install, the Auto-Close after
Install, and the Auto-Launch buttons, your upgrade will be installed automatically,
the install program will close, and your SCADA program with updated software
will launch.
Figure 3: Options, Files tab