SPYPOINT BF-6 - Manual (Page 6)

10 11
English
English
View Date/Time: To view the date and time printed on the
picture.
Protect: Protects the photo and video to prevent
it from being deleted by selecting "Erase
All".
Erase one: To erase from the memory card the
photo or the video seen on the screen.
Erase All: To erase from the memory card all stored
photos and videos, with the exception
of protected photos and videos.
Format: To format memory card and to erase all
protected photos and videos.
Language: To select language.
Exit: Allow to exit the menu to return to the
viewing screen.
Here are the moon phases that can be printed on photos.
New moon:
Waxing Crescent:
First Quarter:
Waxing Gibbous:
Full moon:
Waning Gibbous:
Last Quarter:
Waning crescent:
DELAY
To select the time interval before the camera records another
photo or video.
Additional setting: It is possible to decrease the delay between
detections to 10 seconds (instead of 1 minute) by using the
following procedure. Note that the battery life will be
affected.
Turn OFF the camera. Press and hold the UP button, turn the
camera on. "10_S" appears on the screen meaning the 1 minute
delay has been replaced by a 10 second delay. To reset the
camera to 1 minute delay, follow the same procedure. "1_M"
appears on the screen (see figure below).
MULTI-SHOT
To take up to 4 consecutive shots at each detection, with a 10
second delay between each photo. This option is available in
PHOTO mode.
VIDEO LENGTH
Allows you to select the recording duration when the camera is
set in VIDEO mode.
DISTANCE
Turn the dial DISTANCE located on the right side of the camera
to the right to increase the sensitivity.
10_5
10 sec. delay 1 min. delay