SPYPOINT TINY-D - Manual (Page 7)

12 13
English
English
RESOLUTION 2.0 GB 4.0 GB 8.0 GB 32 GB
4 MP
6 MP
8 MP
10 MP
12 MP
1900
1580
1190
950
790
3800
3160
2380
1900
1580
7600
6320
4760
3800
3160
30400
25280
19040
15200
12640
VIDEO RESOLUTION
320 x 240
640 x 480
45 min
30 min
1h30
1h
3h
2h
12h
8h
“BUSY” LED
The “BUSY” light, located beside the LCD screen, lights up
when the camera records a file.
PROGRAMMING
Turn on the camera to navigate in the interface by pressing
“” or “” and press “OK” for selection. To modify the
selection, press “” and “” again and press “OK” to
confirm. To return to the previous menu press “”.
PHOTO
To take pictures. The “Photo” mode must be selected by
pressing “OK”; the test light in the front of the camera will
wink for 60 seconds to allow the operator to walk away from
the camera.
VIDEO
To take videos. The “Video” mode must be selected by
pressing “OK”; the test light in the front of the camera will
wink for 60 seconds to allow the operator to walk away from
the camera.
TEST
To set the camera or the distance. When “Test” mode is
selected, no picture or video is recorded. Walk perpendicularly
in front of the camera. When the camera detects movement,
the light winks to indicate that normally, a photo or video
would have been recorded. If the system does not detect
the movement, increase the distance detection using the
“Settings” menu (the option “Sensitivity” allows the user
to set the sensitivity to “High”, “Medium” or “Low”). You
can also realign the camera differently. Once you understand
how the device responds to detections, you can better adjust
the direction or the height of the camera (Recommanded
installation height: about 3 feet).
In “Test” mode, it is possible to take a picture by pressing
the “OK” button. The photo is saved and appears in
“View” mode.