SPYPOINT S-TINY-3 - Manual (Page 6)

10 11
English
English
Lithium battery pack
This SPYPOINT
® camera can be powered by a rechargeable
lithium battery LIT-09/LIT-C-8 (sold separately, refer to
the section "Options"). This type of battery is less affected
by cold temperatures and lasts up to 3 times more than an
alkaline battery. During the installation of the lithium battery,
place the switch inside the battery case to "RECH". Insert
the battery in the case as indicated and insert it inside the
camera (see figure below)
P INT SPY
TM
INT P SPY
Connector Connector
Top
Connector Connector
Top
TINY-3
P INT SPY TM INT P SPY
Connector Connector
TO INSERT THE BATTERY CASE INSIDE
THE CAMERA
External (12V)
The camera can also be powered from an external 12-volt
DC input such as a 12-volt battery (KIT-12V/BATT-12V, sold
separately) or a 12-volt adapter (AD-12V, sold separately).
During the installation of 12-volt battery, place the switch
inside the battery case to "ALK" (i.e. alkaline).
If combined
with a lithium battery pack, slide the switch to "RECH".
To find the accessories available for the 12-volt, refer to the
section "Options".