Stack-On Security Safes Combination Lock - Manual (Page 2)

HOW TO OPEN
All numbers must be dialed exactly. If you
pass a number, you can not back up. You
must start over. All numbers are to be dialed
to the Top Notch located on top of the dial ring
(the 12 o'clock position).
HOW TO LOCK
1. Close the door.
2. Turn the handle to the locked position.
3. Turn the dial either direction a few rounds.
IMPORTANT
Keep your combination number in a secure place, away
from children. Keep this record of your serial number and
combination number in a secure place separate from your
safe. If you forget or lose the combination number you will
need the serial number as a reference for obtaining a copy
of your combination number.
To obtain a copy of your combination number, follow the
instructions on the attached form.
Example: If the dial combination numbers were 70 - 50 - 30
1. Turn the Dial clockwise passing the first combination number twice landing on the
number the third time.
2. Now turn the Dial counterclockwise, passing the second combination number once
landing on the number on the next time around.
3. Turn the Dial clockwise until you reach the third combination number.
4. The handle should now be able to be released. Turn handle clockwise and pull the
door towards you.
Combination Number
1st
3 times (R)
2nd
2 times (L)
3rd
1 time (R)
1st
70 50 30
3 times twice once
2nd 3rd
STACK-ON PRODUCTS CO.
P.O. BOX 489
WAUCONDA, IL 60084
40247-1205
2 12