Stack-On GORTA-1603 - Manual (Page 3)

9.
Clip the slides to the drawer sides into the square holes on
the outside of the drawers and fasten with a nut and bolt.
NOTE: The nut must be on the inside of the drawer as
shown.
Attach the handle with 2 bolts as shown.
6.
Attach the drawer bottom to the drawer sides using 3
screws on each side. NOTE: Keep the square holes
in the side panels towards the front as shown.
Attach the support bracket to the bottom as shown
using 2 screws.
DRAWER ASSEMBLY
Assemble the 3 drawers as described in steps 5-8.
7.
Attach the drawer back with 10 screws as shown.
NOTE: Keep the square holes in the side panels towards
the front as shown.
8.
Hook the bottom support into the bottom edge of the
drawer front and attach the drawer front with with 4 nuts
and bolts as shown.
NOTE: Keep the handle holes at the top as shown.
Keep these holes
towards front
BACK
7
9
Keep these holes
towards front of
drawer
BOTTOM
SIDE
SIDE
6
FRONT
Keep these holes
at the top
8
BOTTOM
SUPPORT
BOTTOM
SUPPORT
40149-0911
3 12