Stainless Works Chevy Corvette 1992-96 Headers - Manual (Page 2)

9. For systems with catalytic converters, install the converters on the rear of the
header, and install the 2 ½” pipes onto the rear of the converters. Measure where
to cut the 2 ½” pipes to mate to your exhaust system. You may need to have the
pipes on the existing exhaust system expanded to slip over the 2 ½” pipes.
10. Reinstall the air tube fittings, making sure to use never-seize on the threads.
Check all fasteners for proper torque (see your factory assembly manual for
proper torque specs).
11. Drive car for 20-30 miles and let cool completely. Check for clearance on all
pipes and retorque bolts as necessary.
WWW.STAINLESSWORKS.NET 800-878-3635 FAX: 440-543-9183