Summit CP96 User Manual
Page 11
10
3. Replacing the light bulb
a.
Turn the thermostat to the OFF position 0 and disconnect from the electrical
power supply.
b.
Remove all food from the top shelf of the refrigerator and pull the shelf forward
slightly.
c.
The bulb is located in the back of the thermostat housing. Remove the plastic
cover by pressing the front center while pulling upwards on the small rim on
the bottom.
d.
Unscrew the bulb and screw a new bulb into the lamp socket until tight.
e.
Replace the cover, pressing firmly.
f.
Set the thermostat to your preferred setting and close the door.
g.
If the power cable is damaged, ask an authorized service representative to
replace it.
4. Turning off the unit
If possible, avoid turning off the refrigerator. Let it work for long periods of time,
even if there is no food being stored. This will help keep the appliance working
properly for a long time.
If you must turn it off and not use it for a long period of time, turn the thermostat
knob to 0 (OFF) and unplug the appliance. Follow the information above for
cleaning it and keep it in a dry, clean place. Store the refrigerator with the doors
slightly open to reduce the formation of mold and to prevent the door gaskets from
sticking to the cabinet.