Summit FFBF171SS - Manual (Page 8)

7
5. Remove the installed door stopper from the bottom of
the upper door and put it beside the instruction manual
bag.
6. Take the other door stopper from the instruction
manual bag and fit it on the opposite bottom edge of the
upper door using the screw removed from the right-
hand door stopper.
7. Remove the screws that hold the lower hinge, and
transfer them to the accessory package.
8. Take the alternate lower hinge from the accessory
package and fit it into the left hinge position.
9. Transfer the lower door to the hinge location. Secure
the door in a level position and put the lower hinge pin
into the lower hole of the door, then tighten the bolts.
10. Reverse the middle hinge by 180
° then transfer it to the
left hinge position. Put the middle hinge pin in the upper
hole of the lower door, then tighten the bolts.
11.Transfer the upper door to the hinge position. Secure the door, making sure it
is level. Insert the middle hinge pin into the lower hole of the upper door.
12. Reverse the direction of the upper hinge by 180
° and
transfer it to the left hinge position. Put the upper hinge
pin into the upper hole of the door, then tighten the
screws to secure the door.
13. Place the right upper hinge cover on the left position. Take another right
upper hinge cover from the accessory package and set it into the right-hand
hinge position.
14.Replace the base grill.