Summit FF71 - Manual (Page 7)

4. Remove the cover for the middle hinge holes and re-attach it symmetrically
to the holes on the other side.
5. Tilt the refrigerator back or lay it on its back for steps 6, 7 and 8. Use a pad
or blanket to protect the floor and to avoid scratching the painted finish.
6. Remove the leveling legs by turning them counterclockwise. Remove the
lower hexagonal-head screws, two on the hinge side and one near the front
corner of the other side.
7. Attach the bottom hinge symmetrically to the other side of the cabinet with
the screws removed in Step 6. (Do not tighten screws completely.)