Bosch SGSX - Manual (Page 9)

English 7
Checking Burner Cap Placement
• Check to make sure there is no gap between the
burner cap and burner base. See figure “Burner Cap
Placement” to see the correct and incorrect
placements of the burner cap.
• You may gently try to move the burner cap from side to
side to check if it is properly placed. If properly placed,
the cap will click from side to side as the prongs hit the
groove ridge.
Figure 4: Burners Caps
Matching letter
designation.
Burner Base
Burner Cap
Figure 5: Burner Cap Placement
Correct Burner Cap Placement Incorrect Burner Cap Placement