Telematrix DC550 - Manual (Page 26)

26
Programming Pre-dial
When Pre-dial is enabled, the keypad
can be us ed t o di al whil e the te le-
phone is ON HOOK. After pre-dialing,
lift the handset, or press the speaker
key, or press the headset key within
12 s econds to pl ace the o utgoing
call.
1. Press the “PROGRAM” key
(Figure 1 ). Pr ess t he “UP” or
“DOWN” k ey until the di splay
shows
“PREDIAL?” (Figure 2).
2. Press the “
SELECT” key ( Figure
3).
3. Enable will be di splayed on the
LCD. Press “SAVE” to enable pre-
dial. To disable pre-dial, follow the
same procedure (Figure 4).
4. Press
“EXIT” to exit the pr ogram
mode or press “ UP” or “DOWN” to
continue scrolling through the pro-
gram mode.
Save Select Exit
PROGRAM
Figure 1
THEN PRESS
↓ = P r e v ( S e l e c t ) N e x t = ↑
P R E D I A L ?
Figure 2 DISPLAY WILL READ
Save Select Exit
Figure 3 PRESS SELECT KEY
[ E n a b l e d] ( S a v e )
P R E D I A L :
Figure 4 DISPLAY WILL READ