B&B Electronics 3PCI2 - Manual (Page 23)

18 Chapter 3 Documentation Number 3PCI2-0903 Manual
B&B Electronics Mfg Co – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104
B&B Electronics Ltd – Westlink Comm. Pk. – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445
Windows 2000 Professional
This section covers the first part of device driver installation for
Windows 2000 Professional. Windows Classic settings used as
standard.
The 3PCI2 drivers are unique to this series of cards. If at some point
in the future, you want to update these drivers, remove these drivers
before installing the new version. See Removal on page 35.
1. Configure each port on the card for the desired RS-232/422/485
mode using the 3 jumpers for each port. See Chapter 2.
2. Install the card in the slot. Start the computer as Administrator or
ask your system administrator to install the software.
3. Windows will detect the PCI card and start Found New
Hardware Wizard, to begin driver installation
4. Windows 2000 will find new hardware twice. After the driver for
the PCI Serial Card installs, new Com ports will be found and
the serial drivers for the Com ports will be installed.
5. Click Next to continue.