Unisteer, Performance products – Unisteer 8061090 Corvette Pump Kit 1963-82 User Manual
Page 5
Page 5
657440
Note: These Pump Kits will best work with our Rack & Pinion Kit 8011540.
1963-1982 Corvette Final Steps
6. Top off power steering fluid level in pump reservoir.
7.
Start the car and let idle for 10 seconds, “do not turn wheel during this period”. Turn off vehicle. Top
off power steering fluid. Restart car, turn wheel slowly, lock to lock. Check fluid once more, top off if
needed.
8. Vehicle may need to be aligned properly after install.
If you have any questions or problems regarding this product please contact:
UNISTEER®
Performance Products
1555 Enterprise Parkway
Twinsburg OH 44087
800-338-9080
WWW.UNISTEER.COM
Last Revised 6/24/2014
Copyright © 2011 by Maval Manufacturing Corporation All rights reserved.
No part of these materials can be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying, recording or by any information storage and retrieval
system, without permission in writing from Maval Manufacturing Corporation.