USG DONN Suspended Ceiling User Manual

Installation guide: suspended ceiling

Advertising
background image

Planning the Job

Use graph paper; choose a convenient scale, such as one square
per two feet. Measure the length of each wall at ceiling level.

Tools and Materials

– Lag Screws to attach

wire hangers to wood
joists every 4 ft. o.c.

– 18-gauge steel wire

(residential instal-
lation) or 12-gauge
steel wire (commer-
cial installation)

– Screws to attach wall

angles

– Metal snips to cut

tees and wall angles

– Chalk line
– Level
– Pliers
– Utility knife
– Safety glasses

Typical Installation

Tee Patterns

2 x 4 grid layout

2 x 4 Tee Layout

2 x 2 Tee Layout

Planning

For 2 x 2 ceiling panels. Additional 2 cross tees
(dotted lines) are installed parallel to the main tees,
2 o.c.

Installation Guide:
Suspended Ceiling

For 2 x 4 ceiling panels. Full-length main tees
(bold lines) are spaced 4 on center (o.c.), as
measured from the center of one tee to the
center of the next, with 4 cross tees installed
perpendicular, 2 o.c.

1 Draw the room to scale.
Include any irregular areas like bays, alcoves,

columns, beams and stairwells. Note each
dimension on the drawing. Mark locations of
light fixtures and air diffusers.

2 Draw a centerline between the midpoint

of two parallel walls.
If ceiling joists are visible, draw the centerline
perpendicular to the joists.

3 Locate main tees.
The centerline represents the main tee that will

span the middle of the room. For the additional
main tees, mark each 4 interval between the
centerline and each parallel wall.

4 Locate cross tees.
Position cross tees perpendicular to the main

tees, 2 o.c. For a 2 x 2 grid pattern, position
additional cross tees 2 o.c. between and parallel
to the main tees.

Estimating

Add 5% to each figure to allow for errors (round up to the next whole number).

Bill of Materials

Enter this information in the “Bill of Materials” at right.

1 Wall angles
Room perimeter 3 12

= ___________ `5% = __________

2 D

ONN

®

brand main tees

Total length of main tees 3 12 = ___________ `5% = __________
3 D

ONN

®

brand cross tees

Count the number of cross tees
drawn on your layout.

___________ `5% = __________

4 D

ONN

®

brand hanger wire

Total length of main tees 3 4 = ___________ `5% = __________

1 Wall angles
__________ ft., or __________ 12 lengths @ $ _______________
2 D

onn

main tees

__________ ft., or __________ 12 lengths @ $ _______________
3 D

onn

cross tees (2)

___________ @ $ _______________

D

onn

cross tees (4)

___________ @ $ _______________

4 D

onn

hanger wire

___________ @ $ _______________

Advertising