UVP B-100 Series - Manual (Page 4)

The Finger Guard, to keep fingers away from the filter
glass, easily snaps into place on the face of the Cool-Touch
lamps. To install, remove the lamp bezel by slightly pulling
the tabs outwards on each side of the lamp to release. Lift
the bezel off the lamp. Turn the bezel over so the side tabs
are facing up. Place the finger guard in the lamp housing
so that the four clips can be snapped over the finger guard.
PART NO. PART NAME
89-0068-01 Finger Guard (for B-100AP)
Product Warranty
UVP’s products are guaranteed to be free of defects in materials, workmanship and manufacture for one (1) years from the
date of purchase; transilluminators are guaranteed for (2) years. Consumable and disposable parts including, but not limited
to bottles, tubes and filters, are guaranteed to be free from defects in manufacture and materials for ninety (90) days from
date of purchase. If equipment failure or malfunction occurs during the warranty period, UVP shall examine the inoperative
equipment and have the option of repairing or replacing any part(s) which, in the judgment of UVP, were originally defective
or became so under conditions of normal usage and service.
No warranty shall apply to any instrument, or part thereof, that has been subject to accident, negligence, alteration, abuse or
misuse by the end-user. Moreover, UVP makes no warranties whatsoever with respect to parts not supplied by UVP or that
have been installed, used and/or serviced other than in strict compliance with the instructions appearing in the operational
manual supplied to the end-user.
In no event shall UVP be responsible to the end-user for any incidental or consequential damages, whether foreseeable or
not, including, but not limited to property damage, inability to use equipment, lost business, lost profits, or inconvenience
arising out of or connected with the use of instruments produced by UVP. Nor is UVP liable or responsible for any personal
injuries occurring as a result of the use, installation and/or servicing of equipment. This warranty does not supersede any
statutory rights that may be available in certain countries.
Web Site: www.uvp.com
Corporate Headquarters: UVP, LLC 2066 W. 11th Street, Upland, California 91786
Tel: (909) 946-3197 or Toll Free (800) 452-6788 • Fax: (909) 946-3597 • Email: [email protected]
European Operations: Ultra-Violet Products Ltd, Unit 1, Trinity Hall Farm Estate, Nuffield Road, Cambridge, CB4 1TG UK
Tel: +44(0)1223-420022 • Fax: +44(0)1223-420561 • Email: [email protected]
Tabs
Finger Guard
Lamp Bezel
Clip
Use the optional Exposure Box for exposure
of samples at close range to the UV source in
a semi-enclosed area.
Installation: Slide the Box onto the lamp
housing, placing the metal tabs on the top of
the Box into the “fins” on the body of the
Lamp.
PART NO. PART NAME
76-0055-01 Exposure Box (for B-100AP, B-100YP)