Victorio VKP1024A Deluxe Grain Mill - Manual (Page 10)

8
GRAIN MILL TROUBLESHOOTING GUIDE
PROBLEM SOLUTION
The Grain mill rocks from side to
side when the handle is cranked.
The Grain Mill is not properly
mounted and clamped. See p. 4 for
mounting instructions. Also, make
sure the surface you are using is
sturdy and immovable, such as a
built-in counter top.
The grain mill only grinds coarse
no matter what I do.
Make sure the adjustment knob
has the nylon tip on it (see p. 3).
Also, see p. 5 for proper assembly
instructions and p. 7 for Use
Instructions. Be sure to read all
steps carefully. If the problem
persists, contact customer service at
866-257-4741.
The nylon tip is missing from my
adjustment knob.
See Helpful Tips #3 on p. 3.
I am trying to grind (X) and it
doesn’t seem to be working.
Contact customer service at 866-
257-4741.
When I turn the handle, very little
or no flour comes out.
Carefully follow the Use
Instructions on p. 7 and make
certain, after you tighten the
adjustment knob, you turn it
back at least 1/4 turn. An overly-
tightened adjustment knob can
damage the milling cone.