Victorio VKP1024A Deluxe Grain Mill - Manual (Page 5)

3
Care Instructions
To ensure your Grain Mill works properly at all times, please follow the care
and handling instructions below:
• When you receive your Grain Mill, dismantle all parts and wipe them
off using a damp cloth to remove any residue from manufacturing and
packaging.
• Small parts are easily lost, so be sure to handle with care.
• After each use, the Grain Mill can be easily cleaned with a dry, soft
brush or soft cloth.
• If thorough cleaning is necessary, hand wash the Grain Mill in warm
water and dry all parts thoroughly.
• Do not leave any part of the Grain Mill soaking in water.
• Do not clean any part of the Grain Mill in a dishwasher.
Helpful Tips
1. The first time you use the Grain Mill be sure to dispose of the
first 2-3 cups of grain which has been ground as it may contain
metal residue from the manufacturing process.
2. We suggest always starting the Grain Mill adjusted to the finest setting.
However, if you started grinding on a coarse setting and need to
adjust back to fine, then turn the handle counter-clockwise for 2-3 full
rotations while tightening the adjustment knob to the desired setting.
3. Grind white rice through the Grain Mill to remove any build up caused
by normal use.
4. The adjustment knob has a nylon tip that helps keep the milling cone
accurate. This must be in place for the adjustment settings to work
correctly (see diagrams below). In the event the tip receives damage
or is missing, please contact our Customer Service department for a
replacement at 866-257-4741.