Victorio VKP1024A Deluxe Grain Mill - Manual (Page 9)

7
Use Instructions
DO NOT turn the handle if the Grain Mill is empty. This will
damage the milling heads.
Now that you have assembled your Grain Mill properly, read through
ALL of the following instructions before you start the grinding
process.
The first time you use the Grain Mill be sure to dispose of the first
2-3 cups of grain which has been ground as it may contain metal
residue from the manufacturing process.
1. Before you put grain into the hopper,
select the desired coarseness you
want your flour to be by turning the
adjustment knob, clockwise for fine and
counter-clockwise for coarse (see diagram
at right).
2. Never use tools to tighten the
adjustment knob, as it will damage
the mill.
3. For best results, adjust the knob clockwise to the finest setting, just
until the knob is snug, then turn the knob counter-clockwise 1/4 turn
to prevent over tightening and possible damage to the milling cone.
As you grind, you can adjust the knob counter-clockwise, for a coarser
textures, if that is what is desired.
4. Once you have your adjustment knob set, pour grain into the hopper.
The Grain Mill holds 4-1/2 cups of grain, which yields approximately 7
cups of fine flour, depending on the grain.
5. Turn the handle clockwise to begin grinding.
6. *TIP - If the grain mill is grinding too coarse, you can adjust it to be
finer by turning the handle counter-clockwise 2-3 full rotations while
tightening the adjustment knob towards the fine setting.