Blueberry jelly – Victorio VKP1148 Aluminum Steam Juicer User Manual

Page 16

Advertising
background image

14

Blueberry Jelly

Yield: 7-8 half-pint jars.
Ingredients:
4 c. Blueberry Juice

7 ½ c. Sugar

2 Pouches Liquid Pectin

Procedure: Once you have finished juicing your blueberries (refer

to p. 5 for juicing instructions), measure 4 cups of juice into a large

saucepot. Stir in sugar. Place on high heat; stir constantly and bring

to a full rolling boil that cannot be stirred down. Add the liquid

pectin and heat again to a full rolling boil. Boil hard for 1 minute.

Remove from heat; quickly skim off foam. Pour jelly immediately

into sterile half-pint jars, (refer to p. 8 for proper sterilization

instructions), leaving ¼-inch headspace. Wipe rims of jars with a

dampened clean paper towel. Adjust lids and tighten rings finger-tip

tight ONLY. Then, process in a water-bath canner according to your

altitude. If you are unsure of your altitude level, please contact your

local extension office.

Processing Times:

Altitude

Half-pints or Pints

0-1,000 ft

5 min

1,001-6,000 ft

10 min

Above 6,000 ft

15 min

*This recipe has been adapted from the blueberry jelly with liquid

pectin recipe from The University of Georgia’s

So Easy to Preserve, p.

199.

Advertising