Receive mode settings, Ring delay, F/t ring time (fax/tel mode only) – Brother FAX-1960C User Manual

Page 53: Easy receive, If easy receive is on

Advertising
background image

Receiving a Fax

37

6

Receive mode settings

6

Ring Delay

6

The Ring Delay sets the number of times the
machine rings before it answers in
Fax Only

, Fax/Tel or MC:Msg Ctr

(FAX-1960C only) mode. If you have external
or extension phones on the same line as the
machine or subscribe to the telephone
company’s Distinctive Ring service, choose
the maximum number of rings. (See Using
external and extension
telephones
on page 49 and
Easy
Receive
on page 37.
)

If toll saver is on, then the ring delay setting
has no effect. (See Setting toll
saver
on page 58.
)

a

Press Menu, 2, 1, 1.

b

Press a or b to choose Ring Delay.
Press OK.

c

Press a or b to choose how many
times the line rings before the machine
answers (00-04).
Press OK.
If you choose 00, the line will not ring at
all.

d

Press Stop/Exit.

F/T Ring Time
(Fax/Tel mode only)

6

If you set the Receive Mode to Fax/Tel, you
need to decide how long the machine will
signal you with its special pseudo/double-ring
when you have a voice call. If it's a fax call,
the machine receives the fax.

This pseudo/double-ring happens after the
initial ringing from the phone company. Only
the machine rings and no other phones on the
same line will ring with the special
pseudo/double-ring. However, you can still
answer the call on the same line as the
machine. (See Using external and extension
telephones
on page 49.
)

a

Press Menu, 2, 1, 2.

b

Press a or b to choose how long the
machine will ring to alert you that you
have a voice call (20, 30, 40 or 70
seconds).
Press OK.

c

Press Stop/Exit.

Note

Even if the caller hangs up during the
pseudo/double-ringing, the machine will
continue to ring for the set time.

Easy Receive

6

If Easy Receive is On:

6

The machine receives fax calls automatically,
even if you lift the machine’s handset. Press
Speaker Phone or the handset of an
extension or external phone.

When you see Receiving on the LCD or
when you hear ‘chirps’ through the handset of
an extension phone connected to another
telephone wall jack, just replace the handset
and your machine will do the rest.

Advertising
This manual is related to the following products: