Waterpik WP-480 Owners Manual - Manual (Page 9)

E
N
G
LI
S
H
9
8. Attach your fixed mount showerhead or handheld showerhead bracket to the
threads of the Showerpik ® diverter just as the showerhead had previously
been installed on the shower pipe.
NOTE: Showerhead attachments may vary from pictures above.
Adjusting angle of Showerpik ® Bracket:
The Showerpik ® bracket angle can be adjusted up or
down by rotating. Do not force. If bracket rotates down
on its own, call Water Pik, Inc. customer service.
6. Hose Attachment to Diverter Valve:
Locate ridged hose connection end. Line up the notches on the diverter valve
with the raised areas inside the hose nut and insert then turn ¼ turn to lock
into place. (6A)
To Showerpik ® Power Handle:
Hand tighten hose end to the hose
inlet on the back of the Showerpik
®
power handle. (6B)
7. If showerhead or diverter valve
becomes loose during use, re-tighten
large nut as described in step 5.
6A
1 /
4
turn
6B
Tighten