Bushnell ONIX 110 - Manual (Page 41)

41
5. Press OK to display the available settings.
6. Use the up/down navigation keys to select a
setting
(Fig. 76) .
7. Use the up/down navigation keys to highlight √
and press OK.
Setting the WAAS/EGNOS
To enable/disable the WAAS/EGNOS feature:
1. Press the Menu button twice to display the main
menu.
2. Select User Settings and press OK.
3. Select the Set 2 tab using the left/right navigation
keys.
4. Use the up/down navigation keys to highlight
the WAAS/EGNOS option.
5. Press OK to display the available settings.
6. Use the up/down navigation keys to select On
or Off
(Fig. 77) .
7. Use the up/down navigation keys to highlight √
and press OK.
Setting the Backlight
The backlight can be set to always remain on, or turn
off after 30 seconds, 3 minutes, or 10 minutes. The
more you use the Backlight, the faster the batteries
will drain. When the Backlight goes out, press any key
to turn it on again.
To set the Backlight:
1. Press the Menu button twice to display the main
menu.
2. Select User Settings and press OK.
3. Select the Set 3 tab using the left/right navigation
keys.
4. Use the up/down navigation keys to highlight
the Backlight option.
5. Press OK to display the available settings.
6. Use the up/down navigation keys to select a
Fig. 77
Fig. 78