Bushnell ONIX 110 - Manual (Page 51)

51
prompted to specify the file in which you
want to save the geocaching file. Click
OPEN to use an existing file or CREATE to
open a new file.
Specify the location to save the
geocaching file and click Save. A dialog
for a new box pops up. Enter information
such as the name of the box and
comments for the box. If required, edit
the latitude and longitude of the box to
get an accurate location. You can also
establish a new box point by importing
a (*.loc) file from the Internet.
• Metric System – Click to set the
measurement units on the map to the metric system. Distances are
shown in meters (m) or kilometers (km). If not enabled, distances are
shown in miles (mi).
List Menu
The List menu enables you to merge map card files (*.ard) and create a
list map file (*.arl).
Follow these steps to use this menu:
1. Click File | Open to open a map file.
2. Click List | Add An Item to add the file to the list. The selected
item is displayed in the left pane of the program window.
3. Repeat the first two steps to add the required maps. The file list in the
left pane shows all the component map card files and their size. The
total file size is displayed in the lower left corner.
4. After adding all the required files, a map list file (*.arl) is created.
Transfer Menu
The transfer menu enables you to transfer data such as maps, trail logs,
and waypoints and routes between the ONIX 110 and your host PC.