Weidmuller WAVE Control: Current Monitoring Module User Manual
Page 6
19
18
7.
CE Labeling of WAVECONTROL Modules
WAVECONTROL modules carry the CE Mark and comply with the require-
ments of the EU guidelines 89/336/EWG “Electromagnetic Compatibility”
and the therein listed harmonized European Norms (EN).
The EU declarations of conformity are held for the relevant authorities, in
accordance with Article 10 of the above mentioned EU guideline, at the
following address :
Weidmüller Interface GmbH & Co.
Postfach 30 30
32720 Detmold
Tel. +49 5231 14-0
Fax +49 5231 14-2083
e-mail: [email protected]
www.weidmueller.com
6. Accessories
Cat. No.
Cross-connection ZQV 2,5N/2 black
1718080000
Cross-connection ZQV 2,5N/2 red
1717900000
Cross-connection ZQV 2,5N/2 blue
1717990000
Cross-connection ZQV 2,5N/2 yellow
1693800000
Terminal connector, 3-pole
for screw-type connection BLZ 5.08/3 SN OR
– orange
1526560000
– black
1526510000
Terminal connector, 3-pole
for tension clamp connection BLZF 5.08/3
– orange
1707470000
– black
1707700000
Connector markers
– WS 10/5 Multicard for plotter labelling
1635010000
– WS 10/5 blank
1060860000
405872_IS_WAVEcontrol.QXD 29.07.2002 11:53 Uhr Seite 18