Weidmuller IE-MC-VL Series - Industrial Ethernet Media Converters - Manual (Page 4)

Mounting Dimensions
DIN-Rail Mounting
The aluminum DIN-Rail attachment plate should be fixed to the back panel of
Weidmüller Media Converter when you take it out of the box. If you need to
reattach the DIN-Rail attachment plate to the device, make sure the stiff metal
spring is situated towards the top, as shown in the figures below
.
STEP 1:
Insert the top of the DIN-Rail into the
slot just below the stiff metal spring. STEP 2:
The DIN-Rail attachment unit will
snap into place as shown below.
- 4 -