Western Digital WD Livewire Powerline AV Network Kit User Manual - Manual (Page 13)

WD LIVEWIRE POWERLINE AV NETWORK KIT
USER MANUAL
WD LIVEWIRE UTILITY – 10
WD Livewire Utility
Use the WD Livewire Utility to manage your powerline device network.
Note: The WD Livewire devices are plug and play and can be used without having to install any
software. For advanced functions such as diagnostics, firmware upgrades, and creating a private
network without using the Sync button, install the WD Livewire Utility.
Operating Systems Supported
The WD Livewire Utility is supported by the following operating systems:
„ Windows ® 7
„ Windows Vista ®
„ Windows XP
Installation Instructions
1. Turn on your computer and wait for the operating system to load.
2. Insert the product CD into the CD or DVD drive.
Note: If AutoPlay is disabled on your computer, you must install the utility manually. Click Start and
then (My) Computer. Right-click the CD/DVD drive, click Open, and double-click WDsetup.exe.
3. Windows Vista/Windows 7: Click Run WDsetup.exe, and then click Allow.
4. The WD Livewire Setup Wizard screen displays. Click Next.
4 5