Western Digital WD Livewire Powerline AV Network Kit User Manual User Manual
Page 21
Advertising
WD LIVEWIRE POWERLINE AV NETWORK KIT
USER MANUAL
WD LIVEWIRE NETWORK MAINTENANCE – 18
4. Click Browse and select the new .PIB and .NVM firmware files that you
downloaded in step 1. Click OK.
5. Click OK to confirm you have selected the correct firmware upgrade files.
6. Wait until the power LED and PLC-Link LED blink twice (about 65 seconds), then
use a paperclip to press the reset button on the bottom of device for 2 seconds.
7. Repeat steps 2-6 above for all the WD Livewire devices in your network.
Advertising