Western Digital WD Livewire Powerline AV Network Kit User Manual - Manual (Page 17)

WD LIVEWIRE POWERLINE AV NETWORK KIT
USER MANUAL
WD LIVEWIRE UTILITY – 14
Scan
Click Scan to update the status information of the remote powerline adapters.
Privacy
Create a private network that provides you with extra security using the Privacy tab.
Private Network Name
The default Private Network Name, HomePlugAV, displays. To change the Private
Network Name, all devices in the network must have their device passwords entered
(see “Device Password” on page 13). Enter a new name in the Private Network
Name field. Click Use Default (Public Network) to reset the Network Password to
the default name (HomePlugAV).
Place On This Network
Click Set Local Device Only to update the network name of the powerline adapter
connected to your computer via Ethernet. Click Set All Devices to update the
network name of all the powerline adapters in your powerline network. The network
name of the powerline adapters whose passwords have been entered will be
updated.