Western Digital My Book World Edition (white light) User Manual User Manual
Page 176
Advertising
REPLACING A DRIVE (MY BOOK WORLD EDITION II) - 170
MY BOOK WORLD EDITION
USER MANUAL
Before getting started, power off the unit and disconnect all of its cables.
1. Place the unit on a clean and stable surface.
2. Using your thumb, firmly push down on the top front panel of the unit to release
the latch and open the cover.
3. Loosen the thumbscrew that secures the drive cover plate. Remove the drive
cover plate and set aside.
Note: Each drive is designated A or B by a color coded decal.
1
2
3
Advertising