Western Digital My Book World Edition (white light) User Manual User Manual
Page 177
Advertising
REPLACING A DRIVE (MY BOOK WORLD EDITION II) - 171
MY BOOK WORLD EDITION
USER MANUAL
4. Locate the drive you wish to replace (A or B). Using the pull tab, carefully and
slowly pull the drive assembly up and out of the enclosure and set aside.
5. Gently slide the replacement drive assembly into the drive slot until is fully
inserted.
6. Replace the cover plate by sliding it under and between the pull tabs and
securing it with the thumbscrew.
Note: Do not overtighten the thumbscrew.
13
Advertising