Indicators, Leds, Indicators leds – Western Digital WD Sentinel DS6100 Administrator and Maintenance Guide User Manual
Page 18
PRODUCT OVERVIEW
12
WD SENTINEL DS5100/DS6100
ADMINISTRATOR AND MAINTENANCE GUIDE
Indicators
LEDs
The LEDs on the WD Sentinel identify the status of the unit.
Component
Icon
Description
Ethernet ports
Connect the device to a local network.
DC In connector
Connects the device to a DC power cord and the power outlet.
Recovery button
RECOVERY
Button on the back of the server recovers the server (including the operating
system) while using a USB drive in an event of an OS corruption.
USB ports
Connects with USB 2.0 and 3.0 devices such as a USB storage, USB mouse,
USB keyboard, or a UPS.
VGA port
Connects to your VGA monitor
Kensington
security slot
For drive security, the device is equipped with a security slot that supports a
standard Kensington security cable. Visit
for
more information.
LED
Color
State
Description
Power LED
Black
Off
WD Sentinel server is currently inactive.
Blue
Solid
WD Sentinel server has successfully booted the
software and is operational.
Red
Flashing
Indicates that a serious fault has occurred and
needs immediate attention.
Drive LEDs
Black
Off
If the LED is off while other drive LEDs are on, no
drive is installed in the bay.
Blue
Flashing
Drive is currently active. Note that all lights in a RAID
system are active at the same time by design.
Red
Solid
Indicates drive failure. Replace this drive as soon as
possible. The system is no longer RAID protected
until the drive is replaced and the RAID structure is
repaired.
Ethernet
Port
Black
Off
Indicates an inactive state.
Green
Flashing
Indicates link activity.
Amber
Solid
Indicates that there is a link connection