Replacing the sodimm memory module, Replacing a sodimm memory module – Western Digital WD Sentinel DS6100 Administrator and Maintenance Guide User Manual
Page 94
APPENDIX
88
WD SENTINEL DS5100/DS6100
ADMINISTRATOR AND MAINTENANCE GUIDE
Replacing the SODIMM Memory Module
The SODIMM memory module in the WD Sentinel server is “cold swappable.” This means
that the WD Sentinel server must be shut down prior to your module replacement. To shut
down your WD Sentinel server, follow the steps outline in “Shutting Down and Rebooting the
Server” on page 40.
What you’ll Need:
Phillips screwdriver
Replacement SODIMM Memory module
Replacing a SODIMM Memory Module
1.
Shut down the server.
2.
Disconnect all external connections.
3.
Follow the steps outlined in “Removing the Unit Cover” on page 87.
4.
Disconnect all cables attached to the assembly.
Important: To avoid electrostatic discharge (ESD) problems, ground yourself by
touching metal before handling the device.
Important:
Ensure that you carefully lift the ZIF connector gate and remove the ZIF
Display Connector.