Western Digital My Book Live Duo User Manual User Manual
Page 132
Advertising
MY BOOK LIVE DUO
USER MANUAL
REPLACING A DRIVE – 126
4. Loosen the thumbscrew that secures the drive cover plate. Remove the drive cover
plate and set aside.
Note: Each drive is designated A or B by a color coded decal.
5. Locate the drive label that corresponds with the one on the dashboard
Storage
tab.
6. Using the pull tab, carefully and slowly pull the drive out of the enclosure.
7. Remove the screw and pull tab from drive and set the drive aside.
8. Screw the pull tab into your replacement drive.
9. Gently slide the replacement drive assembly into the drive slot until is fully inserted.
10. Replace the cover plate and secure it with the thumbscrew.
Note: Do not over-tighten the thumbscrew.
Drive A
Drive B
Advertising