Western Digital My Cloud EX4 User Manual User Manual
Page 75
MANAGING STORAGE ON THE WD MY CLOUD EX4
70
WD MY CLOUD EX4 PERSONAL CLOUD STORAGE
USER MANUAL
6.
Select the Switch to <RAID Mode> check box, then click Next.
7.
Review the status of your hard drives, then click Next.
8.
Using the Volume slider, select the amount of space you’d like to dedicate to the
selected RAID mode.
To configure your volume as RAID 5+spare, click Create Spare Disk.
RAID 0
Data is striped across multiple hard drives, enabling accelerated
reading and recording of data by combining the work of two or more
drives to increase performance.
RAID 1
Two instantaneous copies of the data are recorded on separate hard
drives so if one of them fails, other(s) continue to read/write data until
the faulty hard drive is replaced.
RAID 5
Offers superior performance and protection by striping data across 3
or more drives and dedicating a quarter of each drive to fault
tolerance.
RAID 10
RAID protocol in which data is written in stripes across primary disks
that have been mirrored to the secondary disks.