Western Digital My Cloud Mirror User Manual - Manual (Page 111)

CONFIGURING SETTINGS
106 WD MY CLOUD MIRROR PERSONAL CLOUD STORAGE
USER MANUAL
Device Profile
1. In the Device Profile section of the General page, view or modify the following settings:
2. If you made any changes, click Save (appears next to the updated field once a change
is made).
Note: Throughout the WD My Cloud Mirror dashboard, the Save and Cancel
buttons display only if you make changes.
Language and Clock
In this section of the General screen, you can change the language that displays in the
WD My Cloud Mirror device’s interface and set the date and time. The date and time are
synchronized to the NTP (Network Time Protocol) server by default. You have the option of
setting the date and time manually or allowing the NTP to access the Internet and
automatically set the time. If you are not connected to the Internet, you must enter the date
and time manually.
Device Name Enter a unique name for your device to identify it on the
network. The device name can be up to 15 characters
long and can not include special characters (e.g., @, #, $
etc.).
Device Description The default description is WDMyCloudMirror. If desired,
enter a different description for your device. The device
description can be up to 32 characters long and can not
include special characters (e.g., @, #, $ etc.).
Serial Number Displays the WD-assigned number that identifies the
specific unit. This field can not be updated.