Western Digital My Cloud Mirror User Manual - Manual (Page 158)

APPENDICES
153 WD MY CLOUD MIRROR PERSONAL CLOUD STORAGE
USER MANUAL
2. Type device IP address in a browser window. The Safe Mode UI appears.
3. Browse to the location where you saved the downloaded firmware.
4. Click Apply to load the firmware.
5. On the dialog box, click OK. The device reboots.
6. Once your reboot is completed, ensure that you clear your browser’s cache. Check your
browser’s help to determine the best way to clear the cache.
7. Once your device has completed the reboot, we recommend that you do a system
restore (“System Restore” on page 121).
Appendix G: Technical Specifications
Ethernet High performance (100/1000) Gigabit Ethernet connection
Internal hard drives 2 WD Red 3.5-inch SATA hard drives
Supported protocols CIFS/SMB, NFS, FTP, AFP
I/O ports
Data transfer rate Gigabit Ethernet (RJ-45) port
USB 3.0 up to 5 Gb/s
*A USB 3.0 host and USB 3.0 certified cable are required to obtain USB 3.0 performance.
Compatibility
Note: Compatibility may vary
depending on user's hardware
configuration and operating
system.
Operating systems:
• Windows 8.1 or earlier
• Windows 7
• Windows Vista
• Windows XP (32 bit) SP3
• Mac OS X Mavericks
• Mac OS X Mountain Lion
• Mac OS X Lion
• Mac OS X Snow Leopard
Browsers:
• Internet Explorer 8.0 or higher on supported Windows
computers
• Safari 6.0 or higher on supported Mac computers
• Firefox 21 or higher on supported Windows and Mac
computers
• Google Chrome 27 or higher on supported Windows and
Mac computers
Physical dimensions
Width 3.90 in (99.06 mm)
Length 6.10 in (154.94 mm)
Height 6.75 in (171.45 mm)
Weight
0 TB
4 TB
6 TB
8 TB 1.8 lbs (0.8 kg)
3.4 lbs (1.6 kg)
4.6 lbs (2.1 kg)
5.0 lbs (2.3 kg)