Stereo (analog, s/pdif, hdmi), Digital pass through via optical only (s/pdif), Digital pass through via hdmi only (hdmi) – Western Digital WD TV Live Streaming Media Player (Gen 3) User Manual User Manual

Page 179: S/pdif), Hdmi)

Advertising
background image

WD TV Live Streaming Media Player

User Manual

SETUP AND ADVANCED FEATURES – 174

Options include:

Stereo (Analog, S/PDIF, HDMI)

This is the default setting that decodes all audio streams into 2-channel output via
analog (RCA connectors), S/PDIF (optical connector), or HDMI. Recommended if
you are using a 2- or 4-speaker entertainment unit.

Digital Pass Through via Optical Only

(S/PDIF)

Select this option if you are using HDMI for video and a S/PDIF (optical) connection
to output multichannel surround sound to a receiver and do not want audio output
from HDMI. After selecting Digital Pass Through via Optical Only, select one or
more of the following options that describe your receiver, then press OK after each
selection. Press then, with the

selected, press OK again.

„

AAC capable receiver

„

Dolby Digital capable receiver

„

DTS capable receiver

„

WMA Pro capable receiver

Digital Pass Through via HDMI Only

(HDMI)

Select this option if you are only using an HDMI connection to output multichannel
surround sound to a receiver. After selecting Digital Pass Through via HDMI Only,
select Auto Detect to have the media player detect receiver settings automatically.
Or, select Manual Setup.

Advertising