Western Digital WD TV Live Streaming Media Player (Gen 3) User Manual - Manual (Page 29)

WD TV Live Streaming Media Player
User Manual
NETWORK SETUP – 24
2. Press OK on the remote.
After performing one of the wireless setup functions above, press OK.
After establishing a network connection, you can:
„ Use the Internet services integrated into your media player to access
streaming media. See “Internet Services” on page 90 for more information on
these services.
„ Access your media files on the network. See “Finding Your Content” on
page 26.
Checking the Network Connection
If you experience network problems, check the network connection to determine the
cause of the problem.
To check the network connection:
1. Press Setup on the remote.
2. Press / to select Network Settings, then press OK.
3. Press / to select Check Connection, then press OK.
The unit will automatically check the network connection. Once the check is
completed, the results display. A green check mark on these items indicate that
there is no problem with your network settings. If a problem is indicated, check
your router settings and manual for a solution.
A red cross mark indicates a problem with the network settings. It can either be
the IP address or the DNS server address. If the problem persists, check with
your Internet service provider.