Western Digital WD TV Live Streaming Media Player (Gen 3) User Manual - Manual (Page 21)

WD TV Live Streaming Media Player
User Manual
GETTING STARTED – 16
Home Theater (High Definition)
To connect a home theater system:
1. Plug an HDMI cable into the HDMI connector on the media player.
2. Plug the opposite end into the HDMI In port on your A/V receiver.
3. Plug an HDMI cable into the HDMI Out port on your A/V receiver.
4. Plug the opposite end into the HDMI port on your TV (if available).
5. Select the appropriate TV input source.
To connect a home theater system using S/PDIF:
1. Plug a S/PDIF cable into the S/PDIF connector on the media player.
2. Plug the opposite end into the S/PDIF In port on your A/V receiver.
3. Plug HDMI or composite connectors to the appropriate Out ports on the media
player.
4. Plug the opposite end(s) into the appropriate port(s) on your TV.
5. Select the appropriate TV input source.
6. Set the appropriate audio output option on the media player. See “Audio/Video
Output” on page 173.
HDMI and S/PDIF cables sold separately.
My Book ® external drive
(sold separately)
or