Western Digital WD TV Play Media Player User Manual - Manual (Page 125)

WD TV Play Media Player
User Manual
SETUP AND ADVANCED FEATURES – 120
Audio/Video Output
Use the menus in this category to configure playback for audio and video files.
Video Output
Use this menu to select a video signal. After you finish making your selections, select
OK at the “Are you sure you want to change the video resolution?” prompt, then
press OK.
Composite
When using the standard RCA A/V cable (yellow, red, and white connectors) to
connect the media player, select Composite in the Video output screen.
You will be prompted to select the TV standard applicable to your device. This
setting depends on your regional location.
Options include:
„ NTSC – United States, Canada, Japan, Mexico, the Philippines, South Korea,
and Taiwan.
„ PAL – Europe, Greenland, parts of Africa and South America, the Mideast,
China, India, Australia, and Indonesia
Select a regional TV standard then press OK.
HDMI
When using an HDMI cable (if your TV supports HDMI resolution), select HDMI in the
Video output screen.
You will be prompted to select the applicable HDMI video resolution (set to Auto, or
from 480p to 1080p). Select display resolution then press OK.
Note: The further down the list the setting, the higher the resolution and clearer the picture.
After setting resolution, you are prompted to select color space (set to Auto, or RGB
High, RGB Low, or YCbCr). Select color space then press OK.