Western Digital WD TV Play Media Player User Manual - Manual (Page 134)

WD TV Play Media Player
User Manual
SETUP AND ADVANCED FEATURES – 129
To change functions, press / to select a function button, then press OK. Press
/ to select a different function for the button such as My Storage, Help, etc., then
press OK.
To reset the function buttons to default settings, select Reset, then press OK.
In Store Demo Mode
When set to On, this option allows settings to be changed and functions tested for
demonstration purposes. After exiting Store Demo Mode, all previous user settings
are restored. When the media player is idle for 60 seconds in Store Demo Mode, a
demo video begins playing if there is a connected content source with the media
located in the root of the drive. Press OK to exit idle mode when this occurs.
LED Light Control
Use this menu to turn off the LED light (Always Off). If always turned off, the LED will
only appear during start up then disappear after the device has booted up. The
default setting is Normal.