Western Digital My Passport Ultra User Manual - Manual (Page 25)

MY PASSPORT ULTRA
USER MANUAL
WD SMARTWARE SOFTWARE FUNCTIONAL OVERVIEW – 20
Backup source device
selector When the computer option is selected, lists all of your computer’s
internal hard drives, hard drive partitions, and direct-attached
drives that are available as a backup source device.
Backup source selector Provides options for selecting the type of source device you want
to back up:
• Selecting the computer option displays your computer icon
and lists all of your computer’s internal hard drives, hard drive
partitions, and direct-attached drives in the device selector.
• Selecting the Dropbox option displays the Dropbox icon and
hides the device selector.
Backup target content
gauge After installing the WD SmartWare software—before running your
first backup or copying any files to the device—the backup target
content gauge shows only a small number of files in the Additional
Files category. These are the system files and hidden files that your
computer’s operating system put there when you installed the
device.
After running a backup or copying files to the device, the backup
target content gauge shows:
• All of the files that have been backed up in the same categories
as the content gauge for the backup source device (see
“Backup source content gauge” on page 19)
• Any other files that you have copied or saved to the device in
the Additional Files category
Backup target device icon Provides the name of the backup target device connected to your
computer.
If you have more than one supported device connected to your
computer, left-click the one that you want to use for backup and
retrieve functions. The WD SmartWare software highlights your
selection with a light-blue background:
(Continued)
Table 1. Home Tab Functional Description (Continued)
Display Component Description
Selected My Passport Drive