Installing on windows vista computers, Installing the driver automatically – Western Digital My Passport Ultra User Manual User Manual

Page 76

Advertising
background image

MY PASSPORT ULTRA

USER MANUAL

INSTALLING THE SES DRIVER

– 71

Installing on Windows Vista Computers

After connecting the drive as shown in Figure 3 on page 5, the Found New Hardware
screen displays.

Note: If Autoplay is enabled, two additional screens might appear at the same

time as the Found New Hardware screen. If they appear, close them.

You can use the Found New Hardware screen to install the SES driver either:

• Automatically, if your computer is connected to the Internet

• Manually, whether your computer is connected to the Internet or not

Installing the Driver Automatically

To install the SES driver automatically, your computer must be connected to the Internet:

1.

Verify that your computer is connected to the Internet.

2.

On the Found New Hardware wizard screen, click Locate and install driver

software:

3.

On the Found New Hardware - WD SES Device wizard screen, click Yes, search

online this time only to allow Windows Vista to connect to Windows Update:

Windows Vista automatically:

• Connects to Windows Update

• Finds, downloads, and installs the SES driver

Advertising