Troubleshooting, Installing, partitioning, and formatting the drive, Frequently asked questions – Western Digital My Passport Ultra User Manual User Manual

Page 70

Advertising
background image

MY PASSPORT ULTRA

USER MANUAL

TROUBLESHOOTING

– 65

Troubleshooting

This chapter includes the following topics:

Installing, Partitioning, and Formatting the Drive
Frequently Asked Questions

If you have problems installing or using this product, refer to this troubleshooting section
or visit our support website at

http://support.wdc.com

and search our knowledge base

for more help.

Installing, Partitioning, and Formatting the Drive

*The FAT32 file system has a maximum individual file size of 4 GB and cannot create par-
titions larger than 32 GB in Windows. To create partitions larger than 32 GB in FAT32
when reformatting the drive, download the External USB/FireWire FAT32 Formatting Util-
ity from

http://support.wdc.com/product/download

.

Windows users can avoid these size limitation by formatting the drive to NTFS using
either the Windows Disk Management utility or similar third-party software. For further
details, see:

Answer ID 291 at

http://support.wdc.com

Article IDs 314463 and # 184006 at

support.microsoft.com

The appropriate third-party software documentation or support organization

Frequently Asked Questions

Q:

Why is the drive not recognized under My Computer or on the computer desktop?

A:

If your system has a USB 3.0 or USB 2.0 PCI adapter card, be sure that its drivers
are installed before connecting your WD USB 3.0 external storage product. The drive
is not recognized correctly unless USB 3.0 or USB 2.0 root hub and host controller
drivers are installed. Contact the adapter card manufacturer for installation
procedures.

Q:

Why won't my computer

boot when I connect my USB drive to the computer before

booting?

A:

Depending on your system configuration, your computer might try to boot from your
WD portable USB drive. Refer to your system’s motherboard BIOS setting
documentation to disable this feature or visit

http://support.wdc.com

and see

Knowledge Base answer ID 1201. For more information about booting from external
drives, refer to your system documentation or contact your system manufacturer.

How to

Answer ID

• Partition, and format a WD drive on Windows (8, 7, Vista, XP) and Mac

OS X

3865

• Convert a Mac OS X GPT partition to an NTFS partition in Windows XP

3645

• Convert a Mac OS X GPT partition to an NTFS partition in Windows 7

or Vista

3647

• Download software, utilities, firmware updates, and drivers for WD

products (from the Downloads Library)

1425

• Format a WD external hard drive in FAT32* (to use Windows or Mac

OS X)

291

1

10

Advertising