Home theater (high definition) – Western Digital WD TV HD Media Player (Gen 1) User Manual User Manual
Page 20
Advertising
WD TV HD Media Player
User Manual
GETTING STARTED – 17
Home Theater (High Definition)
To connect a home theater system:
1. Plug an HDMI cable into the HDMI connector on the HD media player.
2. Plug the opposite end into the HDMI In port on your A/V receiver.
3. Plug an HDMI cable into the HDMI Out port on your A/V receiver.
4. Plug the opposite end into the HDMI port on your TV (if available).
5. Select the appropriate TV input source.
Note: HDMI cable sold separately.
My Book external drive
(sold separately)
Advertising