Western Digital WD TV HD Media Player (Gen 1) User Manual - Manual (Page 56)

WD TV HD Media Player
User Manual
SETTINGS AND ADVANCED FEATURES – 53
Enabling/Disabling the Media Library
To enable the Media Library:
1. Press Home, Settings , then the Settings category. The System menu opens.
2. Highlight Media Library, then press ENTER. The System screen opens.
3. Highlight On or Off, and then press ENTER. A Media Library prompt appears. (To
turn automatic Media Library off, highlight Off).
4. Press ENTER.
When the currently attached USB drive has not been previously scanned, the HD
media player begins the Media Library process. The status LED starts blinking to
indicate that this process is taking place. The process duration varies from a few
seconds to several minutes, depending on the storage capacity of the USB
device and the number of available media files.
When the status LED stops blinking, the process completes and the compilation
results display.