Yukon Trail Dirt Hawk 20 Owners Manual - Manual (Page 19)

DO NOT RETURN STORE. For questions regarding assembly and use, call Customer Service: 877-441-6999.
How to use the SLA Chargers (Standard)
1. Red light means charging
2. Green light means charge-full
3. Input: AC100-240V
～, 1.5A (Max) 47/63Hz
4. Output: DC29.2V—2.0A
5. Plug the charger into the outlet. The indicator light on the top of the
charger will illuminate when the charger is working properly. Refer to the
sticker on the charger for actual status light indication.
6. Insert the Plug into the charger port on the bike being sure the charger
plug is fully seated in the charger port. The light should be solid red or
blinking green to indicate charging however you will need to refer to the
sticker on the charger for actual status light indication.
7. Once the battery reaches full charge, the lights will return the solid green
however you will need to refer to the sticker on the charger for actual status
light indication.
8. When charging is complete, unplug the charger from the wall before
removing it from the charger port.
Charge, for the full time. If the battery still has not charged, you may need to
replace it.
Use only Yukon Trail Authorized SLA battery chargers with
bicycles equipped with SLA batteries.
Using any other charger will damage the batteries and void your warranty.
CAUTION
CHARGE ONLY LEAD ACID TYPE RECHARGEABLE BATTERY.RISK OF ELECTRIC
SHOCK, DRY LOCATION USE ONLY. SEE INSTRUCTION MANUAL FOR USE.