Zuco CONTE two User Manual

Page 5

Advertising
background image

GB

The electronic operating manual can be found at

www.zueco.com

Guarantee – notes

Guarantee: Independent of warranties for defects, Züco
grants a 5-year gurantee in the case of normal use at 8 hours
a day. If used for longer periods of time, the Guarantee period
shortens accordingly. Product parts which are subject to
general wear and defects caused by improper use, improper
treatment, extreme climatic conditions, improper tampering,
materials placed on the chair or deviations from the standard
designs as requested by the customer are exempt from the
guarantee.

Castors: hard castors are fitted as standard for soft floors.
Soft castors (grey tread) are required for hard floors. The user
may change the castors himself/herself if necessary.

Maintenance: the chair is maintenance-free if used in the
correct manner. We recommend that you occasionally adjust
the seat height.

Cleaning: please do not use any aggressive cleaners or
chemical cleaning agents to clean the surfaces of the chair
and the upholstery.

Gas lifts: only trained specialists may work on the gas pres-
sure lifts. There is a considerable risk of injury if improper work
is carried out.

Conte meets technical and occupational medical re­

quirements and is in conformity with Din standard

1335/1­3. the safety test Mark was issued by tÜV

rheinland.

we reserve the right to make technical changes.

Headrest (optional):

The height oft the headrest can easily

be adjusted, and the headrest also

swivels (contoured form).

Lumbar support (standard):

Mesh version:

The lumbar support can be raised

or lowered by pulling up or pushing

down the lever on the plastic pad on

the backrest.

auto­synchron­plus

mechanism:

The backrest counterpressure auto-

matically adjusts to the body weight

in any seating position. The backrest

tilt angle can be set to 3 positions and

can be adjusted to the forwardmost

position (-). Turn therefore the lever

to the back.

Pre­adjustment of the

backrest counterpressure:

The backrest counterpressure can

be pre-adjusted in two positions. To

increase the backrest counterpressu-

re turn the handwheel clockwise to

the rear; to reduce counterpressure:

Turn the handhweel anticlockwise

to the front.

seat­tilt adjustment:

The seat-tilt can be adjusted in two

positions (-1°/-6°). To increase the

seat-tilt to -6° turn the lever clock-

wise to the rear. To return the seat

to the basic position: Turn the lever

anticlockwise to the front.

seat­height adjustment:

To raise the seat: Take your weight

off the seat, pull the right lever up-

wards, let go of the lever when the

seat is at the desired height.

To lower the seat: Put your weight

on the seat, pull the lever upwards,

let go of the lever when the seat is in

the desired position.

seat­depth adjustment

(5 cm):

Pull the button out and guide the

seat forwards; to lock, let go of the

button. To return the seat automati-

cally to its basic position: Take your

weight off the seat, pull the button

out.

2F multifunctional armrests:

The height can be adjusted by pres-

sing the button under the armrest.

By releasing the lever under the seat

next to the armrest, the armrest can

be pulled out to achieve a larger

seat area.

Advertising